Видео

How do you release the spring on the connectors to the coil packs? I messed around with them for 15 minutes then gave up and just pushed the coil packs out of the way but it would of been nice to remove them.

Fixed my renegade! Thanks!

Thanks for the help 👌🏾

Great video & greetings from NJ! I attempted removing the driver's side cv axle on my 2014 fusion yesterday, & the axle is stuck in the wheel bearing..so I may have to remove the steering knuckle/bearing/cv axle altogether..any suggestions for removing the steering knuckle? Any special tools needed for putting the ball joint back together? Can the tie rod bolt be removed without an impact wrench? The other end of the axle in the transmission came right out..Thanks!

Thanks for your clear video.

Can you put a link here to the follow up video showing the repair?

Thanks my 2014 interceptor had the same problem . Remember all wires On top The manufacturers harness are after market , blue with white tracer and brown wire That comes out of the main harness and gets diverted up to the aftermarket strobe lights in the rear deck lid. You need to splice These wires back Into the main harness and it should fix your issue.

Great video, it helped me.

The easy way doesn't include me having to manufacture a specific tool.

Thank you for the guide, was able to repair my own window. The cable had slipped and actually cut into another part of the plastic binding it up completely. ruclips.net/video/YXuwo8ehRUU/видео.htmlsi=o0I3Ok9xwKhdNLwd

Hello there, I have a 2008 HHR LS 2.2, and the issue is having is that is blowing really hot air with the air conditioning on, but I mean blowing really hot as if the heater was on instead of the air conditioning. Thank You and God Bless.

Exactly what I was looking for. Thank you!

Thanks

Thank you! I’m going to try it!!

You seem like a very likable person. Just from this video I can tell you’re respectable, knowledgeable and hard working. Thank you for the clear and concise video, you included all the important details like bolt size and difficulties we might face in doing the project as you have. Respect and props to you

How about the tire pressure

Thank you

Hello! Would you post a link to where you got the parts from? I have a 2014 Nissan Sentra. Thank you!

Isn't this part replacement for an Ignition lock cylinder, not an ignition switch?

We did the rear brakes on my son's Mustang many years ago (2000 something model) and instead of using a tool to screw in the rear calipers (because I wasn't aware of it), I used a large needle nose pliers. Yes, it was more difficult, but it got the job done. After cleaning the surface of the axle flange, I use some kind of lubricant such as a light coat of anti seize to help prevent rust from forming in the future. Bare metal will just rust again. Thanks again, we'll be replacing his CX5 brakes soon.

I'm having the same problem

Tytyty

Idea: use a cv axe impact tool to pull the mount of the transmission.

Could you give us the torque specs? For all the various bolts…Tks! Great video!

I got the same problem 😂

This really helps me understand how to do the brakes on our 2015 CX-5. Thank you!

This is not a 2005 Chrysler Town and Country

Why does it get so dirty down there with dirt?

Good video Almost Great if you would of done the torque

also what are the torque specs? thanks

Do you have a video replacing the 4th mount on the right side ? It looks a lot more complicated

Seemed simple enough. Let's hope it goes just as smooth for me and my '82 Leone this weekend. Thanks for a simple and clear video 🌸 Cheers from Sweden 🇸🇪

Thank you

It’s a t30 on mine.

Great! Thank you

Hello I have 2007 Kia Sedona my AC blows out hot air on the driver side when the AC on. on passenger side it’s not blowing out any air but u can here ac trying blow the air out and the AC works perfectly find and back it come out nice and cold would u have any suggestions

That link connecter use an Allen wrenching that slot

Seems simple enought. BUT. Wouldn't that cause low charging volt or something not normal during the charging system test done at the battery? Mine shows charging during the test but volt meter drops below 12 while driving and that cut the ac blower off. Goes back to normal 3 seconds later.

Very very helpful, thank you very much from England.

How much was it to fix it

U have 2 bypass stwich,that's what I had 2 do 2 mine

Thank you so much. There is a heat wave and the temperature climbed up when the air conditioning was on. I never seen a Hyundai Elantra with so many miles on it, wow!

46A - A/C clutch solenoid 2010 ford ranger 4L i cant seem to find the dam thing

Thank you mine started goin half way

Thanks so much, great video, direct to the point, very valuable. Blessings 🙏 🙏 🙏

Very helpful ❤

I know you felt like you didnt have to loosen 2 hose clamps to remove the air tube to get the job done, but it would have been helpful for your viewers to see what you were doing a bit better. Especially when you dont have someone holding the camera to move in closer while recording for you. Just a idea for ya. Thanks for your video. Much appreciated.

Thanks!

You just saved me $200! I’m a girl who doesn’t know anything about cars, this video was super helpful and straightforward. Thanks!

Fixed it using this video!